Versióó

Swot Data Products

Data Products for Hydrology

Four main products have been defined. The pixel-cloud and raster products are in NetCDF format, while the river and the lake are in shapefile format, compatible with GISs. River- and lake-specific products are linked to a priori databases, which will be updated during the mission.

"River" products

Each river over 30 m wide is defined in an a priori database, as a line along the centre of the river divided into reaches of 10 km long, and as nodes every 200 m along this line. 

River products are provided according to these two types of breakdown, as defined in the a priori database: for the "node" file, with mean values around each node for parameters such as width, height, flooded area, etc., and for the "reach" file the mean height, mean slope, mean flow, etc. on each of these river reach.

These products are provided for each satellite pass.

The "reach" file product is also provided by cycle, in which case the values of the variables are provided on each of the different passes that measured all or part of the section of the river in question during an entire satellite cycle (21 days).

See a movie illustrating these products

"Lake" products

Water surfaces that are not known rivers, and that are more than one hectare in size, are treated as "lakes". 

The product for each individual satellite pass gives information (height, surface area, contour, etc.) for each observation of these surfaces. 

For each object that can be linked to an element of the a priori lakes database, the identification information is added.

The product for each cycle includes a median contour, and the average height of the lakes for passes when they were seen in their entirety (observations of only part of the lake are not taken into account). Other more complex scenarios (views of different parts of the lake at each passage) will be taken into account.

See a movie illustrating these products

"Raster" products

A "raster" product (see the example of the Po above) will be systematically generated from the "pixel cloud" product. It will be in NetCDF 2D format, will cover four point-cloud tiles (the 2 swaths and 120km along the ground track) and will come in two resolutions: 100m and 250m. The raster product will be given on a regular grid according to a Universal Transverse Mercator (UTM) projection. This will be a one-per-pass product.

It can also be generated on demand (via the data dissemination portal, TBC): 

  • format: NetCDF, GeoTiff, etc.,
  • subset of variables,
  • resolution (>100m) and user-defined area, with a limit on the volume of the data to be downloaded.

"Pixel cloud" product 

This is the rawest product for land surfaces. A file, in NetCDF format, covers a tile, which corresponds to a swath on one of the two sides (left or right) over 60 km along the satellite's ground track.

The product provides longitude, latitude, height, pixel size, corrections and uncertainties for each point classified as water, for points on a buffer zone around these water zones as well as on systematically included areas (defined according to an a priori mask).

This product is generated for each pass of the satellite.

There is also a companion product called the pixel-cloud vector product which includes height-constrained geolocation and assignement to river and lake database. 

 

(Left: raw pixel cloud product – Right: pixel-cloud vector product)

Data Products for Oceanography

Oceanographic data over the open ocean are "low resolution", pre-processed on board.

The variables provided in the data and formats will be quite similar to the Geophysical Data Records existing today in conventional altimetry, but on swaths (so in two dimensions instead of along the track).

Several variants of these products will be distributed, in half orbits (tracks), at 2 x 2 km resolution, every 2 km, on a grid following the ground track:

  • SSH/SSHA "basic" products
  • wind / waves / sigma0 "Basic" product 
  • Expert products, with the information of the SSH/SSHA commodities, but also all the corrections, auxiliary data, etc. necessary for their calculation (note some additional corrections compared to conventional altimetry, in particular errors induced by the roll angle, and internal tides)

These three data sets being provided

  • on the actual ground track (which may vary by +/- 1 km from the theoretical orbit)
  • and also in variants projected on the theoretical ground track (therefore always stable from one cycle to the next).
  • A final expert dataset "SSH and Sigma0 Power and Variance", with a native resolution of one pixel of 500 m x 500 m every 250 m, will also be available.
EnglishFrançaisEspañol
Rss feedsContactPartnersFAQLexiconLegal noticePersonal Data Protection Policy
Debe habilitar las cookies en las preferencias del navegador de manera que se registra
Vous utilisez une ancienne version d'Internet Explorer, mettez le à jour pour profiter pleinement des fonctionnalités d'Aviso+

Personnaliser la page d'accueil

Tout afficher
Affichage reduit
Grand public
Utilisateur

Ajouter un widget

Découvrir AVISO+

Accueil personnalisable, outils de lecture, guide de recherche produits, etc. Découvrez pas à pas les nouvelles fonctionnalités du site AVISO+.

Page d'accueil personnalisable

La nouvelle page d'accueil se compose de blocs appelés "widgets".

Réorganisez les blocs avec un "Click & Drop".

Masquez un widget avec la croix en haut à droite. Réinitialisez ou ajoutez un widget avec l'icone "Clé à molette". Les profils "Utilisateur" et "Grand public" vous proposent une organisation prédéfinie.

Toutes les modifications sont automatiquement enregistrées en cookies sur votre poste. Vous créez ainsi votre AVISO+.

Outils de lecture

Améliorez votre confort de lecture en personnalisant la couleur de fond des pages (noir/blanc) et en modifiant la taille de la police.

Menu navigation et fil d'Ariane

Afin de faciliter vos déplacements au sein d'AVISO+, vous pouvez à tout moment naviguer en utilisant les rubriques et sous-menus interactifs ou le menu navigation sur la gauche de votre écran (ouvert par défaut). Pour plus de lisibilité du contenu des pages, le menu de navigation peut se replier sur le côté et réapparaître grace à au petit onglet de va-et-vient. A tout moment, vous pouvez retrouver votre position dans le site grâce au menu navigation ou grâce au fil d'Ariane, situé au dessus des titres de page.

Guide de recherche de produits

Le premier sous-menu de la rubrique "Données" vous amène à un nouveau formulaire de recherche vous permettant de trouver plus rapidement le produit qui vous convient. Une liste de résultats s'actualise en fonction de vos critères de sélection.

Nouvelle galerie AVISO+

Le premier sous-menu de la rubrique "Multimédia" vous conduit à la galerie AVISO+ regroupant une sélection d'images et vidéos en liant avec l'altimétrie et ses applications. Bonne visite!