Operational News

07.11.2019 FTP protocol important information

We would like to inform users that the FTP protocol is no longer supported by most common browsers[more]

30.09.2019 [Jason-2] OSTM/Jason-2 mission to cease acquisition of scientific data

After more than 11 years in orbit, the Ocean Surface Topography Mission (OSTM) on Jason-2 will permanently cease acquisition of scientific data.[more]

12.06.2019 [Saral/Altika] Cycle 128 GDR release

GDR cycle 128 (11 March 2019-15 April 2019) was just released recently[more]

22.05.2019 [Jason-2] Jason-2 is back to work

All core mission instruments have been restarted today on the last available pass :

POSEIDON at 08:54:07UTC AMR at 08:56:06UTC GPSP at 08:59:15UTC

The first OGDRs will be available around 10:30UTC.

As a reminder, 2 maneuvers are still necessary to place Jason-2 correctly in order to resume the geodetic cycle #2, stopped on February 16th. According to the current plans, this should be achieved on Tuesday 28th of May.[more]

10.05.2019 [Saral/Altika] Cycle 127 GDR release

Dear SARAL/Altika users,

Please take note of the disclaimer below : 

GDR cycle 127 (04 February 2019-11 March 2019) was just released recently. During this cycle SARAL/AltiKa satellite regularly encountered mispointing events. The availability and the quality of data measurements continue to be degraded from time to time. CNES, EUMETSAT and ISRO inform users that removing any ocean data with âoff_nadir_angle_wfâ over 0.09 deg² will ensure a good data quality.

Detailled information about calval analysis is given in this page.

Quality assement report is available here.[more]

09.05.2019 Maintenance on the Aviso+ Web services on May 14th 2019 between 10h and 10h15 UTC

Due to a maintenace, the Aviso+ web sites will be disrupted on May 14th between 10h and 10h15 UTC. This will concern, the website, the Aviso+ extraction service, the TDS (Opendap), and the Live Access Server (LAS) [more]

26.04.2019 [Saral/Altika] Data quality : back to normal

Dear SARAL/Altika users, 

We are pleased to inform you that the quality of data is almost back to normal. Indeed, ISRO teams have improved the pointing stability thanks to new operational procedures.

Since April 19th 2019, the availability and the quality of data measurements are better (small time to time limited effects may anyway occur). Therefore, before using the data, Users are still invited to remove any ocean data with âoff_nadir_angle_wfâ over 0.09 deg²)[more]

18.04.2019 [Saral/AltiKa] Data information

Dear SARAL/Altika users,

 Please take note of the disclaimer below :

 SARAL/AltiKa satellite encounters since 3rd of February 2019 some issues affecting the nadir pointing accuracy. ISRO Operational Team in charge of the platform is doing many efforts to fix the issues and to recover a nominal mission as soon as possible.  

The availability and the quality of data measurements is degraded from time to time. Nevertheless, Cnes, EUMETSAT and ISRO have decided to continue the dissemination of the near real time and off-line products;  Therefore, before using the data, Users are invited to remove any ocean data with âoff_nadir_angle_wfâ over 0.09 deg²; otherwise standard quality flags may be used.

GDR cycle 126 (31 December 2018-04 February 2019 is just released today. It covers the beginning of the degraded period and you are encouraged to read the associated Cal/Val report available on AVISO+. In brief, during this cycle mispointing is quite larger than usual from pass 962 (03/02/2019 06:21:18 ) due to this attitude deviation. Hence a higher percentage of rejected measurements (up to  80%) is observed starting at pass 962. The attitude deviation also explains the higher percentage of missing measurements Users are advised not to use data with off_nadir_angle > 0.09deg².[more]

12.04.2019 [Jason-3] Jason-3 is back

This Morning, on a pass at 07:00UTC(i.e. on cycle 116, pass 246) all JASON-3 core mission instruments were restarted :

-POSEIDON at 07:16:24UTC

-AMR at 07:18:12UTC

-GPSPB at 07:20:01UTC

The first post-SHM mission telemetry has been delivered. First IGDRs will be Distributed on Monday April 15th.

[more]

09.04.2019 [Jason-3]The Jason-3 spacecraft entered safe mode on Saturday, April 6, 2019 at 23:17:22 UTC

The Jason-3 spacecraft entered safe mode on Saturday, April 6, 2019 at 23:17:22 UTC, immediately interrupting its measurements.

SEALEVEL j3 datasets in NRT are no longer updated with fresh data up to the recovery of the mission.

Investigation in progress on CNES side, the root cause has not yet been identified. [more]