Version mobile

Level-2Plus Wave products: New calibration of Jason-3 against in-situ data 

RELEASE :  

the 29 November 2022 
System v3.0 

The waves of the reference mission are calibrated against in-situ data over 4 years of data. The Level-2Plus waves of the other missions are calibrated on this reference mission corrected by buoys.
Currently the L2P wave products (up to version 2) were intercalibrated on Jason-3 and then a linear fit, determined by Queffeulou and Croizé-Fillon (2017) between Jason-2 and in-situ data, was applied to calibrate all the missions on the in-situ data. Nevertheless, comparison of L3 wave products (which use L2P wave products as input) with buoys have shown that the L2P/L3 wave products overestimate the swh. For L2P wave products version 3 a new absolute calibration between the reference mission and in-situ data will be used. In 2022, Jason-3 was calibrated against in-situ data, and a new lookup table has been produced by Dodet and Piollé  (2021). This new absolute calibration replaces the old linear fit determined by Queffeulou and Croizé-Fillon (2017). There are two advantages to this new calibration:  

  • the first is that as there was not enough data for Jason-3, the former calibration had been done on Jason-2 mission and used for Jason-3. Now Jason-3’s record is sufficiently long to produce its own, independent calibration.   
  • the second is that a lookup table is sensitive to non-linearities in the correspondence between the in-situ and altimetric measurements, whereas the linear function by definition was not (figure 1 below). 

Although Sentinel-6a is the new reference mission, until such a time as a sufficiently long record exists to permit a new calibration, it will be cross-calibrated with Jason-3 the same as any other secondary mission. However future missions that cannot be cross-calibrated with Jason-3 will be cross-calibrated with Sentinel-6a (which is itself cross-calibrated with Jason-3, which in turn has been calibrated against in-situ data). 

The new absolute calibration leads to differences from the preceding one which depend on the mission. For example, Figure 2 shows the regional differences for Sentinel-3A. We can see an impact for low and high waves. A more exhaustive validation is done in section VI of the QUID (https://catalogue.marine.copernicus.eu/documents/QUID/CMEMS-WAV-QUID-014-001.pdf) to present and assess the quality of the new calibration.
 

CALIBRATION PERFORMANCES :

For validation purposes, the L3 wave products (which use the L2P wave products as input) are compared to buoys.

The new calibration produces a lower bias for every mission, and a lower RMSE.  Sometimes the scatter index is higher with the new calibration, however it has been noted that this measure (and the RMSE) is not always reliable, because the mean and scatter are partially linearly dependent (Mentaschi et al., 2013).  The HH index is a more reliable indicator for validation purposes (Mentaschi et al, 2013), so it is included here as well, and it unambiguously favours the new calibration over the old one.
 

 

DATA INFORMATIONS :

The switch to the new absolute calibration has been done on November 29. The new files are available in the same folder as the current operational one with no change in the format or nomenclature. Only the global attribute “product_version” will change from 2_0 to 3_0

L2P wave/wind handbook: https://www.aviso.altimetry.fr/fileadmin/documents/data/tools/hdbk_L2P_WAVE_S3_S6.pdf 


References:
Dodet, G. and Piollé, J-F. (2021): Calibration of Level 2 Jason-3 GDR-F significant wave heights against in-situ measurements. Technical Report (Ifremer).
Queffeulou P. and Croizé-Fillon D. (2017): Global Altimeter SWH Data Set, version 11.4, February 2017. Technical report Ifremer. ftp://ftp.ifremer.fr/ifremer/cersat/products/swath/altimeters/waves/documentation/altimeter_wav e_merge__11.4.pdf  
Mentaschi, L., Besio, G., Cassola, F., & Mazzino, A. (2013). Problems in RMSE-based wave model validations. Ocean Modelling, 72, 53-58.

EnglishFrançais
Flux RssContactPartenairesFAQLexiqueMentions légalesPolitique de protection des données personnellesMobile
Vous devez activer les cookies dans votre navigateur afin que vos préférences soient enregistrées.
Vous utilisez une ancienne version d'Internet Explorer, mettez le à jour pour profiter pleinement des fonctionnalités d'Aviso+

Personnaliser la page d'accueil

Tout voir
Affichage reduit
Grand public
Utilisateur

Sélectionner un widget

Découvrir AVISO+

Accueil personnalisable, outils de lecture, guide de recherche produits, etc. Découvrez pas à pas les nouvelles fonctionnalités du site AVISO+.

Page d'accueil personnalisable

La nouvelle page d'accueil se compose de blocs appelés "widgets".

Réorganisez les blocs avec un "Click & Drop".

Masquez un widget avec la croix en haut à droite. Réinitialisez ou ajoutez un widget avec l'icone "Clé à molette". Les profils "Utilisateur" et "Grand public" vous proposent une organisation prédéfinie.

Toutes les modifications sont automatiquement enregistrées en cookies sur votre poste. Vous créez ainsi votre propre AVISO+.

Outils de lecture

Améliorez votre confort de lecture en personnalisant la couleur de fond des pages (noir/blanc) et/ou en modifiant la taille de la police.

Menu navigation et fil d'Ariane

Afin de faciliter votre navigation au sein d'AVISO+, vous pouvez à tout moment naviguer en utilisant les rubriques et sous-menus interactifs ou le menu navigation sur la gauche de votre écran (ouvert par défaut). Pour plus de lisibilité du contenu des pages, le menu de navigation peut se replier sur le côté et réapparaître grâce au petit onglet de va-et-vient. A tout moment, vous pouvez retrouver votre position dans le site grâce au menu navigation ou grâce au fil d'Ariane, situé en haut des pages.

Guide de recherche de produits

Le premier sous-menu de la rubrique "Données" vous amène à un nouveau formulaire de recherche vous permettant de trouver plus rapidement le produit qui vous convient. Une liste de résultats s'actualise en fonction de vos critères de sélection.

Nouvelle galerie AVISO+

Le premier sous-menu de la rubrique "Multimédia" vous conduit à la galerie AVISO+ regroupant une sélection d'images et de vidéos en lien avec l'altimétrie et ses applications. Bonne visite!