Mobile version

Mean Sea Level product and image interactive selection

Aviso proposes a new interactive tool enabling to plot the Mean Sea Level trend times series and maps by selecting an area, a time-period (for time series only), one or several satellite missions, ...

The corresponding mean sea level trend value is updated in the subtitle following any change in your time period or area selections. Outputs can be downloaded in image format (png) and/or in NetCDF or ASCII format. Some screenshots and a how-to tutorial present you these new features. The Mean Sea Level products have been reprocessed to take into account improvements performed on altimeter standards. Further information about the new standards hereSubscribe to Aviso+ products to get informed about updates on MSL indicator.

- for scientific and statistics reasons, period under 5 years are not significant.
- Default values are 2-month filtered data (green curve for "Reference Mission"). The trend value is based on these default values. The downloaded files correspond to these default values with 2-month filtered data.
 -"Reference" products are computed with the T/P-Jason-1-Jason-2-Jason-3 serie for the time series and with merged datasets for the maps;
- "multi-mission" products include all the satellite time series overlaid after being adjusted from biases. The multi-mission time series are available only as images.
- Seasonnal and annual signals are filtered when you select  "Seasonal Signal" "Removed".


March 2017

  • Integration of Jason-3 mission from cycle 001 (January 2016) for the individual time serie and from cycle 012 (June 2016) for the Reference time serie.
  • Due to this short period, no map is plotted for Jason-3.

October 2016

  • New interactive tool to plot the Mean Sea Level (this is one presented in the top of this page). Screenshots and how-to tutorial presents its main features.
  • Changes in Jason-1, Jason-2, Topex/Poseidon, Envisat standards, detailed in the Table "Processing and Corrections" and in the pdf document
  • Improvements in the MSL processing methodology detailed in the same pdf document.

July 2014

  • Integration of Saral mission 

January 2014

  • Changes in Jason-1, Jason-2, Topex/Poseidon, Envisat standards, detailed in the Table "Processing and Corrections" and in the pdf document
  • Improvements in the MSL processing methodology detailed in the same pdf document.

July 2013

  • integration of Jason-1 geodetic orbit:
    • New corrections: MSS_CNES_CLS11, new orbit
    • computation of bias between repetitive orbit and geodetic orbit

December 2012

  • Jason-2:
    • new GDR-D orbit standards.
    • New corrections: MSS_CNES_CLS11, tide model: Got4.8

September 2012

  • Jason-1 (cycles 228 to 259) take now into account the JMR replacement product. The cycles 1 to 227 remain unchanged.

April 2012

April 2011:

  • Time series for Reference mission (T/P-J1-J2) are available for ALL areas,
  • Three areas are added: Black Sea, North & South Hemispheres.

August 2010:

  • Two different datasets merging satellites are now available:
    • reference for the T/P-J1-J2 homogeneous time series or the merged data for the maps
    • multi-mission, a plot combining all the satellites MSL curves (no data available, only time-series).

May 2010:

  • MSL curves and data provided by Envisat and Jason-2 missions have been added.
  • For all missions, MSL data have been reprocessed with GOT4.7 tidal model.
  • T/P MSL have been reprocessed with a new SSB solution (Tran et al., 2010) and GSFC orbit.

January 2010: Jason-1 data computed using reprocessed GDR-C data (see Jason-1 GDR handbook for more information about this new version and its contents).

June 2009: a new option, to take the Glacial Isostatic Adjustment into account, is now available. This applies only on the global time series.

December 6, 2007: A new option is available for Jason-1 mean sea level.
Wet tropospheric correction can derive from radiometer measurements or from a model (ECMWF) (up till the recent Jason-1 data re-processing, radiometer measurements weren't really usable for mean sea level, and only the model was used). But these two data sources both can vary (model update, yet uncorrected problem on the radiometer data, etc.). We now propose both possibilities for Jason-1 mean sea level data. This should enable a quicker detection of any problem on either one.
Mean sea level computation is one of the most sensitive altimetry applications. This is why it is one of the indicators monitoring continuously the altimetry data quality (Calval).

Rss feedsContactPartnersFAQLexiconMobile
You must enable cookies in your browser preferences to save the modifications
You are using an older version of Internet Explorer, please update to take full advantage of Aviso+ features

Customize the home page

View all widgets
Reduce display
Public profile
User profile

Select/Deselect widgets

Discover AVISO+

Customizable home, reading tools, products search guide, etc.. Discover step by step the features of the new site AVISO+.

Customizable homepage

The new home page is composed of blocks called "widgets".

Rearrange the blocks with a "Click & Drop".

Hide a widget with the cross at the top right. Reset or add a widget with the "wrench" icon. The "User" and "Public" profiles offer a predefined organization.

All the modifications are automatically saved as cookies on your machine so as to enable you to have your own specific AVISO+.

Reading tools

Ease your reading by choosing the page background colour (black/white) and/or by modifying the font size.

Browsing menu and breadcrum trail

To ease your browsing through AVISO+, you can use at any time the main banner items with the interactive submenus or use the browsing menu on the left side of the screen (it is open by default). For more readiness of the page contents, you can fold and unfold the browsing menu by clicking on the tab. At any time you can know where you are thanks to the browsing menu or the breadcrum at the top of the page.

Products search guide

The first submenu of the "Data" banner item leads you to a new search form enabling you to find quickier the product that suits your needs. The list of results is updated according to your selection criteria.

AVISO+ Multimedia

The first submenu of the "Multimedia" banner item leads you to AVISO+ collections of images and videos linked to altimetry and its applications. Have a nice visit!